Vollterra Get price

Guides · E-rickshaw

Can a 51.2 V lithium battery replace a 48 V lead-acid set in an e-rickshaw?

By the Vollterra team · · 4 min read

Short answer

Yes, in most cases. A "48 V" lead-acid set and a 51.2 V LiFePO4 pack work in a similar voltage range, so most 48 V e-rickshaw controllers run on a 51.2 V lithium pack. Check two things first: that your controller is rated for the pack’s full-charge voltage, and that you use the lithium charger made for the pack, not the old lead-acid charger.

Can a 51.2 V lithium battery replace a 48 V lead-acid set in an e-rickshaw?

Why the numbers look different

Battery voltages are nominal labels. A lead-acid set of four 12 V batteries is called 48 V, but it sits well above 48 V when fully charged and drops as it discharges. A LiFePO4 pack of 16 cells at 3.2 V each is called 51.2 V. In practice the two operate across a similar window, which is why 51.2 V LiFePO4 became the standard lithium replacement for 48 V e-rickshaws and loaders.

Three things to check before you switch

  1. Controller voltage rating. A fully charged 16-cell LiFePO4 pack reaches about 58 V. Most 48 V e-rickshaw controllers handle this. The rating is on the controller label. If in doubt, send us a photo.
  2. Current. The controller should not draw more continuous current than the pack’s BMS is rated for. Our 3W pack uses an 80 A smart BMS.
  3. Charger. Use the lithium charger supplied with the pack. Lead-acid chargers use a different charging profile, including a float charge once the battery is full, which lithium cells should not be left on.

What changes after the switch

  • The vehicle gets much lighter, because a lithium pack weighs a fraction of a lead-acid set.
  • Range stays steadier through the day, since LiFePO4 holds its voltage well until it is nearly empty.
  • No more water top-ups or terminal cleaning.
  • Charging is quicker and wastes less electricity.

How we confirm the fit

Send us your vehicle make and model, and a photo of the controller label, on WhatsApp. We confirm the fit and the connector before you buy. Our 51.2 V 105 Ah pack comes with Anderson connectors and a matching charger.

Not sure which pack fits?

Send us your vehicle model or what you need to power. We reply with a fit check and today's price.

Ask on WhatsApp

Questions people also ask

Will a 51.2 V battery damage my 48 V e-rickshaw?

Not if the controller is rated for the pack’s full-charge voltage of about 58 V, which most 48 V e-rickshaw controllers are. Check the controller label or send us a photo.

Can I use my old lead-acid charger with a lithium battery?

No. Use the lithium charger made for the pack. Lead-acid chargers use a different charging profile.

Is the charger included with the Vollterra 3W pack?

Yes. The 51.2 V 105 Ah pack comes with a matching charger.

Sources

  1. Battery University BU-403: Charging lead acid
  2. Battery University BU-409b: Charging lithium iron phosphate
WhatsApp us
Call WhatsApp us