Storage · Solar · Telecom
Backup that lasts years, not seasons.
Lithium storage packs for solar systems, shops, clinics, offices and telecom sites. We size every pack to your load and the hours you need.

In shortVollterra makes LiFePO4 storage batteries in four formats: wall-mount packs for homes, shops and clinics, 19-inch rack-mount modules, an all-in-one 2.5 kVA ESS with a 2.56 kWh battery built in, and 48 V modules for telecom sites. Each system is sized to your load and the backup hours you need.
The range
Wall-mount, rack-mount, all-in-one and telecom.




All-in-one lithium ESS
Inverter and battery in one box.
A 2.5 kVA pure backup unit with a 25.6 V LiFePO4 battery built in. Two Indian sockets on the back, a UPS output switch, battery reset and an MCB. Status lights and a power button on the side. No separate battery rack, no loose cables.
| Rating | 2500 VA / 2000 W |
| Battery | 25.6 V LiFePO4, 2560 Wh |
| AC input | 220 V, 11 A, 50 Hz, single phase |
| AC output | 220 V, 8.4 A |
| Operating temperature | 0 to 45 °C |
| Rear panel | 2 sockets, UPS O/P switch, battery reset, battery on/off, MCB, 2 fans |

Telecom
48 V modules for tower and exchange sites.
Each module slides into a standard 19-inch rack and carries its own breaker, terminal blocks with covers, RJ45 comms ports, address DIP switch and an SOC light bar. Modules run in parallel through a bus bar panel, so a site can add capacity one module at a time.
Designed and built in-house. Telecom certification is in progress.
Solar storage
Store daytime solar for evenings and outages. Built for daily cycling.
Shop & office backup
Lights, fans, computers and billing kept running through power cuts.
Industrial & telecom
Compact backup for towers and equipment, including remote sites.
Quick sizing
How big a battery do you need?
Enter what you want to run and for how long. We size for 80% depth of discharge so the pack lasts. Then send it to us for an exact quote.
Why our storage packs
Same build as the packs on India's roads.
- LiFePO4 chemistry, chosen for heat stability and long cycle life.
- Smart BMS that balances cells and protects against over-charge, over-discharge and short circuit.
- Built to your voltage and capacity, drawn and assembled in our own plant.
- Service from the plant that built it, not a reseller.
Storage guides
Size it right the first time.
How to size a lithium battery for home, shop or solar backup
A simple way to work out how many kWh of lithium storage you need: list your load, multiply by backup hours, then allow for depth of discharge and inverter losses.
Read the guide →Technology · 4 min readWhat does a BMS do in an EV battery, and why does it matter?
A battery management system watches every cell, keeps them balanced and cuts power before a fault becomes a failure. What a smart BMS does and what to ask about it.
Read the guide →Next step
Send us your load. Get a pack sized to it.
Tell us what you run and how many hours of backup you need.
Real people from our team reply, not a call centre.
